The Allen HDX760 Riding Trowel truly stands alone in the industry with the built-in 'IntelliPower' system that controls both the hydraulics and the engine operation. With 'IntelliPower' the 74hp T4F Hatz diesel engine and the Bosch-Rexroth hydraulic components actually talk to each other to ensure maximum performance and safety at all times. This results not only in unequaled performance and safety protection for these very expensive and critical engines and hydraulic components, but also much longer operating life expectancy.
The HDX605 was designed with the high-volume flatwork concrete contractor in mind. This new rider is not only fully hydraulic, but it also comes with cruise control, digital readouts for accurate fuel levels and diagnostics, and a large 13-gallon fuel tank for longer run times. It is also equipped with powerful pumps that help maintain excellent torque even at high rotor speeds. This makes the machine excellent for panning or finishing operations.
The HP 205 is a 10' Hydraulic ride on trowel machine. It is powered by twin 37HP Kohler engines and has a maximum rotor speed of 180RPM.
The HP 105 is a mechanical drive 8' ride-on trowel, powered by dual 26.5 HP Kohler Engines. It has a 5 Blade spider with a maximum speed of 180 RPM.
The Allen MSP 455 is a totally new Power-Steering, Mechanical-Drive Riding Trowel in the Allen riding trowel line-up. The powerful gas engine, Super Heavy-Duty Gearboxes and Spiders combined with a Torque Convertor Clutch provides a great weight-to-horsepower performer for large and small contractors.
The MSP 445 is an 8’ mechanical ride on trowel machine. Powered by a 37 HP Kohler engine with a maximum rotor speed of 165 RPM
The MP 315 is an entry-level 8' Ride-on trowel machine powered by a 22 HP Honda engine and has a maximum rotor speed of 145 RPM
- Four Lights (two in Front & two in Back)
- Independent Manual Pitch Control
- The seat is Adjustable Front-To-Back and Flips Up for Engine Access
- Torque Converter Clutch for Full Variable Speed Control
- Light switch, key switch, hour meter and 12-volt charger all in one convenient location
- Manual Dual Level Steering
- Electric Powered Spray System
- Four-Bladed Spider with Standard-Duty Gearbox
The MP 245 is an entry-level ride on trowel machine with power steering and mechanical pitch control, it is powered by a 22 HP Honda engine and has a maximum rotor speed of 165 RPM.
The MP 235 is an entry-level ride on trowel machine great for getting close to edges, it is powered by a 22 HP Honda engine and has a maximum rotor speed of 145 RPM. The MP 235 edger allows for a panning width of 85".
The MP 215 is an entry-level 6' ride on trowel machine, it is powered by a 22HP Honda engine and has a maximum rotor speed of 145RPM
Allen Pro-Series Walkers feature precision-engineered gearboxes for a long, trouble-free life. We use cast-iron spiders, pressure plates and lift levers for long wear and continuous service, and we precision machine our trowel arms and spiders to such close tolerances that our trowels do not require bushings. All walk behind trowels can be equipped with a fine pitch or a quick pitch handle.
The pro 436 is a 36” walk behind trowel machine, powered by a 5.5 HP Honda engine, 4 Blade rotor with a maximum speed of 120 RPM.
The pro 436 E is a 36” walk behind edger trowel, powered with a 9HP Honda engine and a maximum rotor speed of 120 RPM. The unique rotating edger ring is perfect for troweling along the edges of walls or around protruding pipe and conduit.
The Pro 436 P is packed with the same great features of the Pro 436 but is powered by a 9.5 HP Kohler propane engine.
The Pro 446 is a 48” walk behind trowel, powered by a Honda 9HP motor, 4 blade rotor with a maximum speed of 120RPM.
The Pro 446tc is a super duty 48” walk behind trowel, powered by a 13HP Honda motor with a maximum rotor speed of 180RPM.
The Magic Screed is a precision-engineered, lightweight wet screed for single operator strike-off of concrete. Fast and easy to use, this high-frequency screed provides uniform distribution over the entire blade length, enhancing the structural integrity of the concrete through consolidation.
Magic Screed HD 7070
The Magic Screed HD 7070 is a precision-engineered, lightweight wet screed for single operator strike-off of concrete. Fast and easy to use, this high-frequency screed provides uniform distribution over the entire blade length, enhancing the structural integrity of the concrete through consolidation.
The Allen Razorback® Truss Screed is the contractor’s preferred brand when high tolerance FL Numbers are specified on concrete floors and pavements. For more than 40 years, Allen Truss Screeds have set the industry’s standard for precision levelness, rigidity, and durability.
Razorback Truss Screed
Heavy-duty screeds for high-tolerance floors or pavement, the Allen Razorback Truss Screed is the contractor’s preferred brand when high tolerance FL Numbers are specified on concrete floors and pavements. For more than 40 years, Allen Truss Screeds have set the industry’s standard for precision levelness, rigidity, and durability. Allen Engineering has a full line of truss screed models and accessories. Most of all, Allen’s commitment to quality and customer satisfaction will ensure that your Allen Razorback Screed will provide years of trouble-free operation.
- Quick Disconnect System
- Low Profile Engine Option
- Wide Range of Horsepower Options
- Hydraulic Powered Winch is Optional
- Manual Winch is Standard
- Bolt-On Replaceable Blades
- Triangular Frame with Vibration Proof Welds
- Eccentric Vibrator Weights
- Replaceable, Greaseable Bearing
The W.H. Duffill Difference
We have the equipment and knowledge to help you succeed at any project. At W.H. Duffill, our team will work with you from concept to completion to ensure you have the right equipment, tools, and supplies. Since 1965, we have built a solid reputation for providing high-quality products and reliable services for companies across SE Michigan. For more information, call the team at W.H. Duffill today at 248-542-3808.